LLC Integral is a registered trademark. ONLY Authorized seller of Integral can sell under Integral listings.
Xbox one console with faceplateand mods xbox one controller skins. Skin for a xbox for xbox one controller will not leave behind games decals residue.
The xboxone new controller decal will prevent it from dust proof, waterproof, oil proof and fingerprints.
1) Clean the unit’s surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of xbox one Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the xbox one console and controller skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time. 6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
2 × controller stickers
1 × console sticker
1 x Kinect sticker
For xBox one Gaming System; 30 day money back guarantee!